11
CAUTION:
Do not use cleaning agents, scouring agents or alcohol, as these may damage the filter components. Do not try to
clean the filter components in the dish washer either. Clean the filter components under running, lukewarm
water only (Fig. 12).
12
6. Place the filter components in a bath tub or shower tray (Fig. 12).
7. Rinse out the filter components thoroughly under running, lukewarm water (Fig. 12).
8. Allow the filter components to dry completely.
CAUTION:
Do not re-assemble the parts until they are completely dry.
Alternatively, a drying mode is available which allows you to use the Truman Cell
imperative that you proceed in drying mode, Zchapter 4.3, „Drying the wet Truman Cell® (drying mode)".
32
5. Disconnect the Truman Cell
(Fig. 11).
NOTE:
In the process, make sure that the thin wires do not become dam-
aged. Take hold of the loading grille by the outer rails only.
®
and loading grille from each other
®
when it is still wet. It is then