Trouble Shooting - Gaggenau AW 2 Série Notice D'utilisation Et De Montage

Removing metal mesh grease filter
1 Take the metal grease filter out of the holder.
2 Pull the metal grease filter downwards. While
doing this, place your other hand under the metal
grease filter.

Trouble shooting

Malfunctions often have simple explanations. Please
read the following notes before calling the after-sales
service.
m
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out and damaged power cables replaced by
one of our trained after-sales technicians. If the
appliance is defective, unplug the appliance from the
mains or switch off the circuit breaker in the fuse box.
Contact the after-sales service.
Malfunction table
Problem Possible
cause
The appliance The plug is
does not work not plugged
in.
Power cut
Faulty fuse
--------
22
Solution
Connect the appliance to
the electricity supply
Check whether other
kitchen appliances are
working
Check in the fuse box to
make sure that the fuse
for the appliance is OK
Notes
‒ Grease may accumulate in the bottom of the
metal grease filter.
‒ Hold the metal grease filter level, otherwise
grease will drip out.
3 Clean the metal grease filter.
Installing the metal mesh grease
filter
1 Insert the metal mesh grease filter.
While doing this, place the other hand under the
metal mesh grease filter.
2 Fold the metal mesh grease filter upwards,
locking it in place.
LED lights
Defective LED lights may be replaced by the
manufacturer, their customer service or a qualified
technician (electrician) only.
m
Risk of injury!
The light emitted by LED lights is very dazzling, and
can damage the eyes (risk group 1). Do not look
directly into the switched on LED lights for longer
than 100 seconds.