Conversion Instructions; Conversion Propane G31 - Dru CONCERTO CF Instructions D'installation Et Mode D'emploi

CONVERSION INSTRUCTIONS

Conversion propane G31

The appliance will have to be converted for it to be able to
run on propane (G31).
This conversion may only be carried out by a qualified
installer, who will also be able to order the required
conversion set.
Disconnect the gas supply before converting.
1
2
CONVERSION INSTRUCTIONS
• Remove the flue restrictor ring (situated in the flue spigot)
• Open the glass door
• Remove the vermiculite tray surrounding the burner
• Remove the oxypilot shield (Two self tapping screws)
• Take out the burner (Two self tapping screws)
• Remove the brass sleeve from the burner and discard
• Using an open-ended spanner remove the burner injector
(NG) and discard
• Fit new LPG burner injector
• Replace the oxypilot (4)
• Replace the new low pressure jet (situated in the gas valve)
• Put back burner, shield and vermiculite tray in reverse order
4
3
21
Concerto CF