Quinny moodd CV078 Guide D'utilisation page 7

9
Canopy
Remove inserts before
installing canopy (Figure 9).
Align tabs to rails on each side
of seat and slide down into
place (Figure 9a).
Unsnap and pull back top of
seat fabric. Line up tab on top
of canopy with top of seat
and slide into place until it
clicks (Figure 9b).
NOTE: Once canopy is fully
attached re-attach the seat
pad.
9b
9
9a
10
Front Bar
Remove insert on seat from underneath as shown by pushing on
depression underneath (Figure 10). Slide front bar into place until it clicks.
Attach elastic underneath seat as shown (Figure 10a).
To Remove Front Bar
Unhook elastic under seat. Push depression under seat and slide front bar
out (Figure 10b). Replace with front insert (Figure 10c).
10
10a
10c
5
Assembly
10b