Starting-Up; Residual Heat Indication - Novy 1002 Mode D'emploi Et D'installation

Starting-up


Start up / switch off the hob:
Action
To start
To stop

Start up / switch off a heating zone:
Action
Zone selection
To set
(adjust the power)
To stop
If no action is made within 20 seconds the electronics returns in waiting position.

Residual heat indication

After switching off of a heating zone or the complete stop of the hob, the heating zones are still
hot and indicate [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on, don't touch the heating zones and don't put any heat
sensitive object on them. There are risks of burn and fire.
Extension zone
Action
select zone
Select the power level
Switch off
Switch on
Control panel
Press key [ 0/I ]
Press key [ 0/I ]
Control panel
Press display [ 0 ] selected
Slide on the "SLIDER"
to the right or to the left
Slide to [ 0 ] on "SLIDER"
or press on [ 0 ]
Control panel
Press display [ 0 ]
Slide on the "SLIDER"
Touch key [ ]
Touch key [ ]
Display
Control light is blinking
[ 0 ] to [ 9 ]
Extension zone light is off
Extension zone light is on
47
Display
4 x [ 0 ]
are blinking
Nothing or [ H ]
Display
[ 0 ] and control light on
[ 0 ] to [ 9 ] or
[ U ]
[ 0 ] or [ H ]
[ 0 ] or [ H ]