Ventilation; Starting-Up And Appliance Management; Before The First Use; Induction Principle - Novy 3753 Mode D'emploi Et D'installation

Ventilation

The cooling system is fully automatic. The cooling fan starts at a low speed when the calories
generated by the electronic system reach a certain level. The ventilation starts its high speed
level when the hob is intensively used. The cooling fan reduces its speed and stops automatically
when the electronic circuit has cooled down enough.

STARTING-UP AND APPLIANCE MANAGEMENT

Before the first use

Clean your hob with a damp cloth and then dry the surface thoroughly. Do not use detergent
because this can create a blue-tinted colour on the glass surface.

Induction principle

An induction coil is located under each heating zone. When it is working, it produces a variable
electromagnetic field which produces inductive currents in the ferromagnetic bottom plate of the
pan. The result is a heating-up of the pan located on the heating zone.
Of course the pan has to be adapted:
•
All ferromagnetic pans are recommended (please verify it thanks to a little magnet): cast
iron and steel pans, enamelled pans, stainless-steel pans with ferromagnetic bottoms...
•
Are excluded: cupper, pure stainless-steel, aluminium, glass, wood, ceramic, stoneware,...
The induction heating zone adapts automatically to the size of the pan. With a diameter that is
too small, the pan doesn't work. This diameter varies in function of the heating zone diameter.
If the pan is not adapted to the induction hob the display will show [ U ].

Sensitive touch

Your ceramic hob is equipped with electronic controls with sensitive touch keys. When your finger
presses the key, the corresponding command is activated. This activation is validated by a
control light, a letter or a number in the display and/or a "beep" sound.
In case of normal use, press only one key at a time.

Power selection zone "SLIDER" and timer setting zone

To select the power with the slider, slide your finger on the "SLIDER" zone. You can already have
direct access if you put your finger directly on the chosen level.
Power selection zone "SLIDER" and
timer setting zone
"SLIDER"
56
Direct access