Swing Button - Argo X2 Série Notice D'utilisation Et D'installation

REMOTE CONTROL FUNCTIONS
REMOTE CONTROL

SWING BUTTON

Press this button to c
angle of the horizontal disc
Select between continuous or xed swinging
depending on the described sequence:
OFF
25
hange the inclination
harge grills.
TIMER ON
TIMER ON BUTTON
Pressing this button the icon
the display for 5 seconds. During ashing it is
possible to adjust the progr ammed switch on
time of the unit acting on the + or - buttons.
Each press of the button + (-) corresponds to
the increase (decrease) of 1minute. Holding
the button +(-) the increase (decrease) will be
of 10 minutes in 10 minutes until the button is
released. To con rm the progr ammed switch
on time, press the TIMER ON button again.
The icon
ON
remote control near to the time. To cancel the
settings press the TIMER ON button again.
TIMER OFF
TIMER OFF BUTTON
Pressing this button the icon
ashing it is possible to adjust the progr am-
med switch on time of the unit acting on the
+ or - buttons. Eac h press of the button +
(-) corresponds to the increase (decrease) of
1minute. Holding the button +(-) the increase
(decrease) will be of 10 minutes in 10 minu-
tes until the button is released. To con rm the
programmed switch on time, press the TIMER
OFF button again. The icon
on the displa y of the remote control near to
the time. To cancel the settings press the TI-
MER OFF button again.
Note:
- It is possible to set both s
switch off programs. The icon
displayed on the remote control.
- In case of po wer cuts, the s witch on and
switch off pr ogrammed settings must be
reset.
ashes on
ON
will appear on the display of the
During
OFF
will appear
OFF
witch on and
will be
ONOFF