Replacing The Batteries; Emergency Functions - Argo X2 Série Notice D'utilisation Et D'installation

REMOTE CONTROL FUNCTIONS
USER GUIDE – SPECIAL FUNCTIONS
BLOCKING THE KEYP AD OF
REMOTE CONTROL
Press the + and - buttons at the same
time to block or unblock the kepad of the
remote control. If the remote control is
blocked, the icon is displayed. Pressing
any button w hen the remote control is
blocked does not c hange the settings and
the icon will ash 3 times.
Defrost control

REPLACING THE BATTERIES

1. Remove the battery cover by sliding it in
the direction of the arrow.
2. Remove the old batteries.
3.Insert two new alcaline high performance
batteries 1.5V LR03 (AAA) pa
attention not to invert the poles.
4. Replace the battery cover
.

EMERGENCY FUNCTIONS

In case of lost or damaged remote control,
use the manual emergency button located
under the indoor unit• s front panel to
switch on and off the unit.
27
THE It is possible to activate the defrost control
on the remote control. Press the MODE
and BLOW buttons at the same time. This
way, H1 will appear on the displa y of the
remote control with the unit off whilst the
same H1 will ash for 5 seconds when the
hot function mode is selected. The defrost
completes the acti ve defrost c ycle both
when switched off and when changing the
function mode.
NOTE
-When replacing the batteries use only
new batteries advised.
- Remove the batteries when not using the
ying remote control for a long period of time
- The remote control can oper ate from a
maximum distance of 7 meters.
- The unit can be in
signals tr ansmitted from television or
videorecorder remote controls or other
appliances used in the room.
In this case, at switch on the Auto function
mode will be set.
AUTO/STOP
Emergency button
uenced b y
Replacing the
batteries
2
1
3
4