Gima PC-300 Manuel De L'utilisateur page 81

81
Figure 2.9A Operation for Lancing Device and Blood Lancet
Quick operation procedure for On Call Plus Glucose Meter:
1. Insert a new test strip into the strip slot, contact bars end first and facing up, to turn on the
meter and display all the display segments. If the audio option is on, the meter will beep, si-
gnaling the meter is turned on.
2. The blinking test strip and blood drop icon will indicate that the test strip is inserted correctly
and a drop of blood can be added.
3. Touch the blood sample to the sample tip at the end of the test strip. If the audio option is
turned on, the meter will also beep to indicate the sample is sufficient and the measurement
is started.
4. The meter will count down from 9 to 1 and then display the measurement results.
The meter will also beep to indicate that measurement is complete.
Refer to Figure 2.9B.
ENGLISH