Switching On The Meter - Xylem SI Analytics HandyLab 700 Mode D'emploi

Start-Up

Switching On the Meter

When you have connected the sensor, you can switch the me-
ter on by pressing the on/off or meas key.
When the meter is switched on with the on/off key, fi rst a self
test is performed and then the calibration data and settings are
displayed before the meter switches to measuring mode.
When the meter is switched on with the meas key, it immedia-
tely switches to measuring mode.
Depending on the connected sensor and the specifi c
measuring task, several steps for confi guration and calibration
must be performed as described on the following pages.
Icons
Important information about the state of the device:
Sensor
condition
Process
variable
Error message
26
Memosens sensor
Date Time
Battery char-
ging level
Temperature
detection
(sensor,
separate or
manual)