Festool DUPLEX LS 130 EQ Notice D'utilisation D'origine page 9

Festool offers the appropriate accessories, sanding
and polishing attachments for every application.
Metalworking
The following precautions are to be taken
when processing metals for safety rea-
sons:
- Pre-connect a residual current circuit-breaker
(FI, PRCD).
- Connect the machine to a suitable dust extractor.
- Clean tool regularly of dust accumulations in the
motor housing.
Wear protective goggles.
Speed adjustment
We recommend the following settings on the rotary
control (1.3) for electronic tools:
Rotary control setting
- sanding work
3 - 6
- sanding old paint
- sanding wood and veneer prior to painting
- interim sanding of paint on surfaces
- sanding profi led workpieces of natural wood
- sanding of thinly applied primer
- smoothing primed wooden surfaces.
- sanding full wooden and veneer edges
- sanding in the grooves/rebates of windows and
doors
- interim paint sanding on edges
- rubbing down stained surfaces with sanding vlies
1 - 3
- interim paint sanding on stained surfaces
- cleaning natural wood window grooves with sand-
ing felt
- sanding stained edges
7 Accessories, tools
Festool offers the appropriate accessories, sanding
and polishing attachments for every application.
The accessory and tool order number can be found
in the Festool catalogue or on the Internet under
"www.festool.com".
8 Maintenance and care
Always remove the power supply plug from
the socket before carrying out any work on
the machine.
All maintenance and repair work which
requires the motor casing to be opened
may only be carried out by an authorised
service centre.
Customer service and repair. Only
through manufacturer or service work-
shops: Please fi nd the nearest address
at: www.festool.com/Service
Use only original Festool spare parts!
EKAT
4
Order No. at: www.festool.com/Service
5
3
2
1
The cool air openings in the motor casing must
always be kept clean and unobstructed to ensure
air circulation.
The tool is fi tted with special motor brushes with
an automatic cut-out. When the brushes become
worn the power supply is shut off automatically
and the tool comes to a standstill.
9 Environment
Do not throw the power tool in your household
waste! Dispose of machines, accessories and pack-
aging at an environmentally-responsible recycling
centre. Observe the valid national regulations.
EU only: In accordance with European Directive on
waste electrical and electronic equipment and im-
plementation in national law, used electric power
tools must be collected separately and handed in
for environmentally friendly recycling.
Information on REACh:
www.festool.com/reach
9