Signature Kitchen Suite SKSFD3604P Guide D'installation page 22

22
Attaching Appliance to Enclosure
WARNING
top of the enclosure.
1. Screw the lugs on the safety bracket at the top of the
appliance to the top of the enclosure.
2. If there is a large gap between the top of the appliance
and the top of the enclosure, insert a piece of wood
gap.
3. Screw the side safety brackets to the sides of the
enclosure.
NOTE: If installing two appliances side-by-side,
attach the appliances to each other using the
enclosure as if they were one unit.
at the top of the appliance until it engages with the top
safety bracket.
snap the top into the base (b).
NOTE: If installing two appliances side-by-side, attach
both top covers using the bolt found in the
accessories package.
1
a
a
b
4X15 4X
4X15 4X