Publicité
CP Softener Series Owner's Manual
G
I
eneral
nformaTIon
About this Manual
This manual will cover information needed for the proper installation and operation of your KineticoPRO Softening
System. We have also included information regarding the frequently asked questions about softening systems. This
information may be more technical in nature, but provides further insight to the continued operation of this equipment
at its highest levels.
This manual will use various icons to help highlight issues that are relevant to the safe operation of this equipment. The
following icons will be used as described:
If there are any additional questions pertaining to this equipment, please contact your local KineticoPRO Dealer for
further assistance.
The Commercial Plus Series
The CP Series provides continuous soft water for commercial applications. The unique design of Kinetico's control valve
allows for all softener functions to operate automatically and non-electrically. The system has a number of options as
described:
(OD) – Overdrive
The Overdrive feature means both tanks are on-line during service. During regeneration, one tank is in service
and provides water to the regenerating tank. All CP systems are shipped in the Overdrive mode. The alternating
disc is also included. To apply a (s) standard flow configuration, the OD version would be purchased and
modified at the time of install.
(s) – Standard or Alternating Service
This is where one tank is in service and the other tank is regenerating or in stand-by. The (s) standard feature
allows for higher hardness levels to be removed, but offers lower service flow rates.
General information regarding the application of this product will be
highlighted by this icon. This will include technical specifications and
expected operational results.
A caution icon will be used to present any information that may hold a
potential hazard or concern during the installation, use or maintenance of
this product. Should this information not be followed, it may result in damage
to this equipment and its surroundings.
The warning icon will be used to present any information that may result in
a severe hazard or concern during the installation, use or maintenance of
this product. Should this information not be followed, it may result in severe
physical harm.
Any tools or materials required during the installation, use or maintenance of
this equipment will be preceded by this icon. Using these specific tools will
minimize time and effort. Not using the proper tool may result in damage to
this equipment, its surroundings or even physical harm.
4
Publicité
