DSC Power832 PC5700 Instructions D'installation

Masquer les pouces Voir aussi pour Power832 PC5700:

Télécharger ce manuel

The PC5700 is a zone expansion module to be used with any control panel which supports the PC5108

module. In addition to four general purpose zone inputs, the module provides the following features: two

Class A supervisory waterflow zones, ground fault detection and dual-supervised telephone lines. The

PC5700 connects to a control panel via the 4-wire Keybus using standard 22-guage unshielded cable.

PC5700 Connection Diagram

Zone Inputs

The first four zone inputs (Z1-Z4) on the PC5700 are general purpose zones which can be programmed as

any zone type offered by the alarm control panel. The last four zone inputs are as follows:

All manuals and user guides at all-guides.com

Installation Instructions

PC57OO

Fire Module

Page 1 All manuals and user guides at all-guides.com Installation Instructions The PC5700 is a zone expansion module to be used with any control panel which supports the PC5108 module. In addition to four general purpose zone inputs, the module provides the following features: two Class A supervisory waterflow zones, ground fault detection and dual-supervised telephone lines.
Page 2 All manuals and user guides at all-guides.com Zone # Zone Type Terminals first four PC5700 zones. Jumpers J4-J6 control the Zone 5 Class A (waterflow) A1+, A1–, B1+,B1– second four PC5700 zones (two water-flow, ground circuit 1 fault and TLM fault zones). Zone 6 Class A (waterflow) A2+, A2–, B2+,B2–...