Publicité
Scope of delivery
The scope of delivery for the appliance is shown on the
packaging. Check the contents for completeness when
unpacking. If any accessories are missing or in the event
of any shipping damage, please notify your dealer.
Description of the device
For the illustrations, refer to the graphics page
Illustration A
Water connection coupling
1
Water connection with integrated sieve
2
Detergent suction hose
3
Mains connection cable with mains plug
4
Storage for high-pressure gun
5
Spray lance dirt blaster for stubborn soiling
6
Spray lance with high-pressure nozzle for normal
7
cleaning tasks
High-pressure gun
8
Clamp for connecting / disconnecting the high-pres-
9
sure hose
High-pressure gun lever
10
High-pressure gun lock
11
High-pressure hose
12
Storage for spray lance
13
Transport handle
14
Transport wheel
15
Trigger "0/OFF" / "I/ON"
16
High-pressure connection
17
Type plate
18
Screws
19
**Garden hose (fabric reinforced, diameter at least
20
1/2 inch (13 mm), length at least 7.5 m, with com-
mercially available quick coupling)
** additionally required
Safety devices
WARNING
Danger of injury!
Serious injuries due to missing, modified or ineffective
safety devices.
Do not bypass or remove the safety devices and do not
render them ineffective. Safety devices are provided for
your own protection.
Power switch
The power switch prevents unintentional operation of
the device.
High-pressure gun lock
The lock locks the lever of the high-pressure gun and
prevents the device from starting unintentionally.
Auto-stop function
If the lever of the high-pressure gun is released, the
pressure switch turns off the pump and the high-pres-
sure jet stops. The pump switches on again when the le-
ver is pressed.
10
Symbols on the device
Do not aim the high-pressure jet may at per-
sons, animals, live electrical equipment or
the device itself.
Protect the device against frost.
The device may not be connected to the
public drinking water network.
For the illustrations, refer to the graphics page.
Fit the supplied loose parts onto the device before start-
ing up the device.
Have the included screws and the appropriate screw-
driver ready.
Installing the wheels
1. Install the wheels on the device so that they latch in-
to place.
Illustration B
Mounting the transport handle
1. Attach the transport handle.
2. Secure the transport handle with 4 screws.
Illustration C
Mounting the storage option for the high-
1. Push in the storage option for the high-pressure gun
into the holder on the device.
2. Hold the storage option in the end position and se-
cure it using a screw.
Illustration D
Mounting the storage option for spray lances
1. Push in the storage option for the spray lances into
the holder on the device.
2. Hold the storage option in the end position and se-
cure it using a screw.
Illustration E
Installing the water connection coupling
1. Screw the water connection coupling onto the water
connection on the device.
Illustration F
1. Place the device on a flat and level surface.
2. Unwind the high-pressure hose and eliminate any
loops and twists.
3. Connect the high-pressure hose to the device.
a Pull up the clamp on the coupling.
b Insert the high-pressure hose into the coupling.
c Press down the clamp on the coupling.
Illustration G
4. Connect the high-pressure hose to the high-pres-
sure gun.
a Squeeze the clamp.
b Pull out the clamp.
c Insert the high-pressure hose.
d Press the clamp in until it latches into place.
Illustration H
5. Check for a secure connection by pulling on the
high-pressure hose.
6. Plug the mains plug into a mains socket.
English
Installation
pressure gun
Initial startup
Publicité
