Settings - Teac CR-H101 Mode D'emploi

3
Start playback on the other Bluetooth
device.
o Confirm that the volume is turned up on the other
Bluetooth device. If you do not turn up the vol-
ume on the playback device, no sound might be
output from this unit.
o Depending on the connected Bluetooth device,
you might not be able to adjust the volume. For
details, refer to the operation manual of that
Bluetooth device.
Warning about Bluetooth device
operation
You can use the following buttons on the main unit or the
remote control to control a connected Bluetooth device.
Play/pause (7/9) button
Skip (.//) buttons
o Depending on the Bluetooth device being used, it might
not respond to remote control operations and actual
operations could differ.

Settings

1
Press the MENU button.
2
Use the direction (l/;) buttons to change
the setting item and press the SELECT
button.
Display
Menu
example
< 1.Set clock
Press the ; button to cycle through the following
items.
1.Set clock
2.CD setting
3.APS setting
4.FA. Reset
Press the l button to cycle through these items in
reverse order.
3
Use the direction (k /j ) buttons to
change the setting, and press the SELECT
button to confirm the change.
Display
Current Time
example
12H/24H
The selected item blinks.
o When there are multiple settings, press the SELECT
button to show the next setting.
2
Repeat procedures
necessary.
o Press the MENU button instead to cancel the set-
ting change.
4
Press the MENU button to complete mak-
ing settings.
>
3
– to set other items as
23