Publicité
17
2
17
3
16
4
16
5
22
INSTALLING SIDE SKIRT TO THE CART
PARTS REQUIRED:
2
x
Side Skirt (#17)
8
x
Screw (#D)
INSTALLATION:
•
From below, secure the side skirt to each leg using four screws. Ensure the
flatter surface of the side skirt is facing outwards.
•
Install the other side skirt to the other two support legs of the unit using
another four screws.
NOTE: FASTEN SCREWS OF THE SUPPORT LEGS ONLY HALF-WAY TO ALLOW
EASIER INSTALLATION OF THE BOTTOM SHELF IN NEXT STEP.
INSTALLING SKIRT TO THE CART
PARTS REQUIRED:
2
x
Skirt (#16)
4
x
Screw (#D)
INSTALLATION:
•
Secure the skirt to each leg using one screw. Ensure the flatter surface of the
skirt is facing outwards.
•
Install the other skirt to the other two support legs of the unit using another
two screws.
NOTE: FASTEN SCREWS OF THE SUPPORT LEGS ONLY HALF-WAY TO ALLOW
EASIER INSTALLATION OF SCREWS FROM THE INSIDE OF BARREL IN NEXT STEP.
16
SECURING SKIRT TO THE MAIN BARREL
PARTS REQUIRED:
8
x
Screw (#J)
INSTALLATION:
•
Open the lid. Install screws from the inside of the main barrel. Mount one skirt
to the main barrel using three screws, through the three pre-drilled holes.
Repeat installation for second skirt. Another skirt to the main barrel using
three screws, through the three pre-drilled holes.
SECURING THE BOTTOM SHELF
PARTS REQUIRED:
1
x
Bottom Shelf (#22)
4
x
Screw (#A)
4
x
Washer (#B)
4
x
Locking Washer (#C)
INSTALLATION:
•
From below secure the bottom shelf to each support leg using a screw, locking
washer, and washer. Ensure the flat surface of the bottom shelf is facing up
towards the grill barrel.
NOTE: TIGHTEN COMPLETELY ALL SCREWS THAT HAVE BEEN INSTALLED IN
PREVIOUS STEPS.
www.vermontcastingsbbq.com
9
Publicité
