Publicité
9
H
H
10
I
H
I
13
10
12
11
11
6
INSTALLING THE FRONT SHELF
PARTS REQUIRED:
1
x
Front Shelf (#10)
2
x
Screw (#H)
2
x
Nut (#I)
I
INSTALLATION:
•
From below, insert the front shelf screw (from the inside) into the front shelf
bracket and front shelf and lock with nut.
•
Repeat installation for the other side of the front shelf.
INSTALLING THE LID HANDLE
PARTS REQUIRED:
2
x
Lid Handle Washer (#11)
2
x
Lid Handle Bezel (#12)
1
x
Lid Handle (#13)
12
11
INSTALLATION:
•
Remove the pre-installed screws from the lid handle. From inside the barrel
lid, insert one screw to protrude to the outside. Add a bezel and a washer on
the screw, then tighten the screw (from the inside) into the lid handle. Do not
over-tighten the screws.
•
Repeat same installation for the other end of the lid handle.
INSTALLING THE BURN GRATE
PARTS REQUIRED:
1
x
Burn Grate (#6)
INSTALLATION:
•
Proper placement and maintenance of the burn grate is vital to the use of
the unit. Insert the burn grate into the burn pot. The hole in the burn grate
should align and be open for the igniter to light the pellets. To verify proper
positioning, ensure the curved lip of the burn grate is flush with the top of the
burn pot, and the notched side should be flush under the fuel deflector.
www.vermontcastingsbbq.com
11
Publicité
