Publicité
6.
Hour digits will be flashed. Press the
7.
Minute digits will be flashed. Press the
8.
If 12 hour display is set before, "AM or "PM" will be flashed. Press the
ENTER button to confirm.
9.
Then the unit will request to set the date. Follow the similar procedures as listed above to complete the setup of day, month
and year.
10. Press the MENU button repeatedly to exit the menu control.
Auto Update
1.
Turn on the unit in DAB mode or FM mode.
2.
Press and hold the MENU button to access the menu control.
3.
Press the
or
4.
Press the
or
5.
Press the
or
6.
Press the
or
●
Update from Any: Time and Date will be updated by either DAB or FM broadcast
●
Update from DAB: Time and Date will be updated by DAB broadcast only
●
Update from FM: Time and Date will be updated by FM broadcast only
●
No Update: Time and Date will never be updated by broadcast
7.
Select your desired and then press the ENTER button to confirm.
8.
Press the MENU button repeatedly to exit the menu control.
Set 12/24 Hour Display
1.
Turn on the unit in DAB mode or FM mode.
2.
Press and hold the MENU button to access the menu control.
3.
Press the
or
4.
Press the
or
5.
Press the
or
6.
Press the
or
to confirm.
7.
Press the MENU button repeatedly to exit the menu control.
Set Date Format
1.
Turn on the unit in DAB mode or FM mode.
2.
Press and hold the MENU button to access the menu control.
3.
Press the
or
4.
Press the
or
5.
Press the
or
6.
Press the
or
press the ENTER button to confirm.
7.
Press the MENU button repeatedly to exit the menu control.
BATTERY LEVEL SAVING
In order to save the battery consumption, the unit in CD mode pause or without playback for around 15 minute will automatically
turn off to the power off mode.
or
or
button until "System" is highlighted and then press the ENTER button.
button until "Time" is highlighted and then press the ENTER button.
button until "Auto update" is highlighted and then press the ENTER button.
button to change between
button until "System" is highlighted and then press the ENTER button.
button until "Time" is highlighted and then press the ENTER button.
button until "Set 12/24 hour" is highlighted and then press the ENTER button.
button to toggle between 12 or 24 hour display. Select your desired and then press the ENTER button
button until "System" is highlighted and then press the ENTER button.
button until "Time" is highlighted and then press the ENTER button.
button until "Set date format" is highlighted and then press the ENTER button.
button to toggle between "DD-MM-YYYY" or "MM-DD-YYYY" date display. Select your desired and then
button to change to hour value and then press the ENTER button.
button to change to minute value and then press the ENTER button.
13
or
button to set AM or PM and then press the
Publicité
