Publicité
BLUETOOTH TRANSMIT OPERATION
The Bluetooth transmit function allows the unit's sound (DAB, FM or CD) wireless transmit to the Bluetooth wireless device for
example wireless speaker.
1.
During the DAB or FM or CD mode, press and hold the BT TX button to start searching the closest available Bluetooth device.
"BT:TX" will be shown on the screen display bottom area in which the portion "TX" is flashing to indicate searching the
Bluetooth speaker in progress. They will be automatically connected and the sound will transmit to the Bluetooth speaker.
2.
Press and hold the BT TX button again will turn off the Bluetooth transmit function.
Note:
-
Please note that it needs a longer time when connecting the device for the first time.
-
Except the Bluetooth device that you want to pair, it is recommended not to turn on other Bluetooth devices within 10
meters during pairing. If the pairing is not successed, please check if there is other Bluetooth decices nearby. Or you can
locate the discman closer (for example within 3 meters and no blocking between them) to the Bluetooth device and try to do
pairing again.
-
If you move out of Bluetooth range (10 meters) between the unit and the Bluetooth device, the "TX" indicator on the display
will begin flashing. Move the unit or your Bluetooth device back within range and reconnect the Bluetooth device if
necessary.
-
If there is no Bluetooth device searched within 2 minutes, the Bluetooth transmit function will be turned off automatically.
BBS
You can enhance the bass effect of the music. Press the BBS button will toggle the bass boost between ON and OFF.
SYSTEM MENU OPERATION
Sleep, Time, Backlight, Language, Factory Reset and SW version can be set under the menu operation.
Press and hold the MENU button to access the menu control. Press the
press the ENTER button. System menu will be shown as below. Press the
below. Then press the ENTER button to setup. To quit the menu control, press the MENU button repeatedly.
Sleep Function
You can set the sleep timer function among off, 15, 30, 45, 60 and 90 minutes. During the sleep timer count down, there is a moon
icon shown on the screen display bottom area. When the sleep timer is zero, the unit will be turned off automatically. To cancel
the sleep function, press and hold the STANDBY
Time Setup
This setup allows you to setup 4 different display modes. They are:
Set Time/Date
Auto update
Set 12/24 hour
Set date format
Set Time/Date
1.
Turn on the unit in DAB mode or FM mode.
2.
Press and hold the MENU button to access the menu control.
3.
Press the
or
4.
Press the
or
5.
Press the
or
button or set the sleep timer to off.
button until "System" is highlighted and then press the ENTER button.
button until "Time" is highlighted and then press the ENTER button.
button until "Set Time/Date" is highlighted and then press the ENTER button.
or
button until "System" is highlighted and then
or
button for different selections as shown
12
Publicité
