Publicité
operation. Press and hold the MENU button to access the menu control. Then press the the
options and finally press ENTER to confirm.
Note:
-
DRC can make quieter sounds easier to hear when the unit is used in a noisy environment.
-
Not all DAB+ broadcasts are able to use DRC function. If the broadcast does not support DRC then the DRC setting in the
unit will have no effect.
-
Changing the DRC value on your unit enables you to apply a scaling factor to this level.
-
After you have adjusted the DRC level the sound may be louder.
There are three levels of compression:
DRC high:
DRC low:
DRC off:
FM RADIO OPERATION
Auto Scan
Press and hold the SCAN button to start auto-scanning and saving the available stations (max. 30 storage).
Manual Scan
Press the
or
button repeatedly to tune to a different frequency, 0.05MHz per step. Alternatively press and hold the
or
button to automatically search to the next available station.
Storing FM Presets (You can save up to 30 FM stations)
Press and hold the PRESET button, "Preset Store" will be displayed. Press the
number to store. Press the ENTER button to store.
Recall Stored FM Presets
Press the PRESET button, "Preset Recall" will be displayed. Press the
recall. Press the ENTER button to recall.
Stereo / Force Mono Selection
When receiving a Stereo FM radio channel, pressing the PLAY/PAUSE
audio.
Displaying FM Station Information
There are several types of information provided by the radio station. To display the information, press the INFO / MENU
repeatedly.
FM MENU OPERATION
Press and hold the MENU button to access the menu control. Then press the
Scan Setting
Press and hold the MENU button to access the menu control. Press the
then press the ENTER button. Press the
Maximum compression as sent with the transmitted service
Set to 1/2 that of the sent transmitted service
No compression
or
or
button to toggle between stereo audio and force mono
button to highlight "Strong stations only" or "All stations". Press the ENTER
10
or
button for different
or
button to select the desired preset
button to select the desired preset number to
or
button for different options.
or
button to highlight the "Scan setting" and
Publicité
