Publicité
button to confirm. When the "Strong stations only" is selected, scanning will ignore the noisy stations and only capture the strong
stations. When "All stations" is selected, all possible stations will be captured during scanning even if it is a bit noisy. The next
time doing the scanning the unit will search for the stations based on this scan setting.
CD OPERATION
Play/Pause/Stop Control
To pause playback press the PLAY/PAUSE
button.
Skip Track/ High-Speed Music Search
During playback press the
button to start high-speed searching. When you release the
Repeat Play / Random Play
During playback, press the PLAY MODE button repeatedly for different repeat playback mode :
Current track, all tracks in the current MP3 folder, all tracks, random and normal.
Programmed Playback
The unit can be programmed to play a sequence of tracks selected.
1.
In stop mode press the PLAY MODE button, the display shows the program number "★01" near the bottom of the screen
display.
2.
Press the
or
3.
Repeat steps 2 to program up to 24 programmed tracks in CD disc (or 99 programmed tracks in MP3 disc).
4.
Press the PLAY/PAUSE
button twice or change to another mode.
5.
During program play you can also do the "Repeat One" or "Repeat All" operation, however random play will not be
supported.
Note:
-
Besides playing CDDA audio disc, the unit can also play MP3 file. However, WMA file and others are not support.
-
Folders or files number on the disc that exceed the supported limit of this product cannot be played.
Resume Playback
During playback, change mode or standby on/off and back to CD mode will continue playback from where you have stopped. To
clear the resume playback, press the STOP
During programming playback, there is no resume playback.
Anti-shock Protection
The unit has an electronic anti-shock protection function to prevent any interruption of the sound output when the unit is
subjecting to shock or vibration during disc playback. The unit's internal buffer can provide a typically 45 seconds when playing a
CDDA disc and typically 120 seconds when playing a CD-MP3 disc of protection against interruption of sound output. If the player
is subjected to shock or vibration for a longer time that the buffer is full, some interruption of sound output will occur. This is
normal. The sound will resume once the unit is stabilized from the shock or vibration.
Note:
-
The anti-skip function provides for continues sound output when the unit is subjected to shock or vibration. It will not
compensate for errors arising from the use of defective, scratched or dirty discs.
button. Press the button again to resume playback. To stop playback press the STOP
or
button to skip to the previous or next track. During playback press & hold the
button to select the desired track. Press the PLAY MODE button to save the desired track.
button to start playing the programmed tracks. To clear the program play, press the STOP
button or open the CD disc compartment door.
or
button normal speed playback will resume.
11
or
Publicité
