Hansgrohe Raindance E 27373 1 Série Instructions De Montage / Mode D'emploi / Garantie page 6

1
2
3
1.
2.
6
2.
1.
English
Installation
Remove the label (1).
Close the stops using a 4 mm Allen
wrench (2) (see page 4).
Cut the plaster shield so that it extends ¹⁄₁₆" - ⅛" from
the finished wall surface.
Seal the wall around the plaster
shield with waterproof sealant (1).
Failure to seal the wall can lead to
possible water damage.
Remove the flush insert screw, flush insert, and seals
(2).