Domo DO9043W Mode D'emploi page 27

DO9043W
At the end of the preheating phase, if the baking tray has reached the correct
temperature, the 'READY light will go on and you will hear an acoustic signal
4-times.
Only the ON/OFF button will work during the preheating phase.
Normal Mode
Switch the appliance 'ON'. After the preheating phase you will see the time indicator
(TIME) light up on the display. The Crispy option (CRISP) is not selected.
The time is indicated according to the following cycle: 2:00 – 2:30 – 3:00 – 4:00 –
1:00 – 1:30.
If you use the pre-set baking time of 2 minutes or have set the desired time length,
press on (START). After 10 seconds the baking tray will start to rotate and baking
will begin. Meanwhile the time you set will run back to 0:00. After baking time has
finished you will hear an acoustic signal and see the previous baking time settings on
the display. The (Ready) light will switch on.
Crispy Mode (CRISP)
If you want to bake your wafers so that they are more crunchy and crispy, press on
the [CRISP] button after the preheating phase and the button's indicator light will
automatically switch on.
If you use the pre-set baking time of 2 minutes or have set the desired time length
manually, press on (START). After 10 seconds the baking tray will start to rotate and
baking will begin. Meanwhile the time you set will run back to 0:00. After baking time
has finished you will hear an acoustic signal 4-times and see the previous baking time
settings on the display. The (Ready) light will switch on.
The Stop Button (STOP)
During the baking time you can interrupt the process by pressing on STOP. After
this you can adjust the baking time by pressing on the timer button (TIME), setting a
different time and then pressing on START to continue the baking process.
Standby
If none of the buttons are used during ± 45 minutes, the appliance will go into stand-
by. The temperature of the baking trays will fall; the display will show the last time
setting used. Pressing on any button will be enough to activate the preheating phase.
You will hear the acoustic signal 1-time.
27