Function Buttons - Domo DO9043W Mode D'emploi

DO9043W
chemicals or water vapor-laden air.
• Never drag the cord. To unplug, grasp the plug only.
• Do not use extension cords to avoid overheating and
risk of fire.
• Handle the unit with care and. Do not put/heat it on
other stoves.

FUNCTION BUTTONS

1. On & off switch. (ON-OFF)
2. The crispy button. (CRISP)
With the crispy button you can
adjust the amount of crispiness
of the wafer. Press the button in
and the button's indicator light
will automatically light up. By
pressing the button once again
the function will be reset to the
normal mode. This button is for
use after the preheating phase
and before u begin baking.
3. Time switch. (TIME) Adjust
baking time manually, from minimum 1 to maximum 4 minutes with a 30 second
interval. The standard baking time begins at 2:00. This button is for use after the
preheating phase and before you begin baking.
4. Stop button. (STOP) Use this to stop the baking process manually.
5. Starting button. (START) Start the baking time. This is to be used after preheating
or any possible manual adjustment of the baking time.
INSTRUCTIONS FOR USE
After you have connected the appliance and turned the switch 'ON', the display will
light up, showing "2:00". This is the pre-set baking time. If the baking tray is not
placed in the correct position the appliance will correct this automatically before the
baking tray is heated.
1
26
5
3 4
2