Publicité
English
Red flashing light ...
... indicates the following:
No electrical contact between
–
battery and charger – remove and
refit the adapter
Malfunction in battery – see also
–
"Light Emitting Diodes (LEDs) on
Battery".
Malfunction in charger – have
–
charger checked by dealer – STIHL
recommends an authorized STIHL
servicing dealer.
12
All manuals and user guides at all-guides.com
Connecting Battery to Power
Tool
A factory-new battery is not fully
charged.
Recommendation: Fully charge the
battery before using it for the first time.
If necessary, remove the cover from
N
the power tool's battery
compartment before fitting the
adapter, i.e. depress both locking
levers to unlock and remove the
cover.
Insert adapter
Insert the adapter (1) in the power
N
tool – the adapter slides into the
compartment – press it down
carefully until it snaps into position –
the adapter must be flush with the
top of the housing.
The battery and power tool are now
connected together.
For further information on switching on
and operating the power tool: see the
instruction manual of the power tool
being operated with this battery.
AR 900
Publicité
