Publicité
10. Operation
f) Cueing
You can select the starting point for playback using the CUE-function. The starting point is set automatically (AUTO
CUE).
The advantage of this function is that e.g. empty parts at the beginning of a track are not played so there
is no pause before the music starts.
Auto CUE
•
Press the |
button (13) or the
the music begins.
Back CUE
•
During playback, press the CUE button (11).
•
The CD player returns to the beginning of the track and pauses.
Checking the CUE mark
•
Press the CUE button (11).
•
The device returns to the CUE mark and pauses.
•
Hold down the CUE button (11).
•
The music is played from the CUE mark as long as you hold down the CUE (11) button.
•
When the button is released, the CD player returns to the CUE mark and pauses.
Deleting a CUE mark
•
The CUE mark is deleted as soon as a new CUE mark is set.
g) LOOP function
You can define a play loop. The starting and end point of the loop is set during playback.
•
At the desired starting point of the play loop, press the IN button (5).
•
At the desired end point of the play loop, press the OUT button (8).
•
The play loop is now played continuously until the OUT button (8) is pressed again.
•
To start a saved play loop, press the RELOOP button (9).
The existing play loop is deleted when a new play loop is programmed.
All manuals and user guides at all-guides.com
| button (14) to automatically set the CUE mark at the position at which
39
Publicité
