Publicité
All manuals and user guides at all-guides.com
Ashtray cleaning Open the lower door, take out the ashtray cover (to release the cover, turn
the two lateral hooks), take the ashtray and empty it carefully, paying attention to possible hot
combustion residuals, place the ashtray in its housing and closed the cover of the ashtray.
DO NOT empty the ashes in inflammable containers, remember that into the ashes could be
some embers, even after several hours from the extinction.
External Cleaning.
This kind of operation has to be done when the stove is cold
Iron / Steel parts : clean with a duster with appropriate detergent.
−
Glass / Ceramic parts : clean with a sponge with appropriate detergent and dry
−
with a duster.
Painted parts : clean with a duster and neutral soap than dry with a duster.
−
Every Month
Cleaning about pellet tank. Clean with a vacuum cleaner to remove every residual of
combustion. Before cleaning let finishing the pellet inside the apparatus and remove the plug.
If necessary take away also the tank grate
Ordinary maintenance
At least once a year a general control on the appliance should be effected by a specialized
technician. According to the time of the use every day and quality of the pellets it can
become necessary to execute these operations more frequently
It is advisable that every year a specialized after-sales service effects the following
•
maintenance operations:
Exhaust gas ducts cleaning;
−
Seat of exhaust gas motor cleaning;
−
Verification and eventually replacement of gaskets;
−
Chimney verification.
−
We recommend to stipulate a contract with an after-sales service.
We recommend to execute a regular maintenance of the appliance, of the fumes exhaust
ducts and of the chimney. In case of a long time of non utilization of the appliance,
before lighting the appliance, verify that fume exhaust ducts and chimney are not
obstructed.
Combustion chamber cleaning (to be carried out by qualified staff only)
Upper part of combustion chamber
-Open the upper door.
-Unscrew the screw which fix the upper inspection plate.
-Aspirate eventual residuals placed over spring holder sheet.
-Utilize the appropriate lever and lift the spring holder sheet and aspirate eventual residuals
placed under the sheet.
-Place again in its seat the upper inspection plate, CHECK the gasket and replace it if
necessary.
(to be carried out by qualified staff only)
70/120
IT IT IT IT- - - - GB
GB- - - - FR
FR mod. Serie 698TP....
GB
GB
FR
FR
Publicité
