Publicité
All manuals and user guides at all-guides.com
During the working phase the appliance controls constantly the
temperature of the room and of the boiler. If during the working phase
at the selected power (i.e. pow.4) one of the two temperatures is
reached, the appliance reduce automatically the power and the display
signals "WORK MODULAT.
INDICATIONS ON DISPLAY
Display
NO SIGNAL
START
LOAD
PELLET
FLAME
LIGHT
WORK
WORK
MODULAT
COOLONG
WAITING
STAND-BY
OFF waiting for re-ignition
Production of warm sanitary
SANI
WORK
698TP+698TPVT+698TPVT
CLEANING
Automatic cleaning cycle of
BASKET
CLEANING
FINAL
SMOKE
MODULAT
ALARM
Appliance in Alarm, start of
ACTIVATD
Appliance phase
The radiocontrol do not
receive a signal from
appliance
Lighting element heating
Initial fuel load
Fuel lighting
Working at power
Working at reduced power
Function in Stand-By
water
(only model
STEEL)
burner basket
Extinction
High fume temperature
extinction cycle
IT IT IT IT- - - - GB
Place the radiocontrol in the same room as
the appliance and eliminate every hindrance
in radio signal ( the aerial is placed in the
back right part of the appliance )
Lighting phase started, heating of the
lighting element
Fuel started to convoy to the burner basket
The appliance has noticed the presence of
fire in the basket, stabilization phase starting.
The appliance has terminated the lighting
phase and is now ready to work at the
selected power.
Boiler or room temperature has reach the
selected values.
Room or boiler temperatures have exceeded
the selected ones. Appliance works in stand-
by waiting for diminution of temperatures.
A selected temperature has been exceeded,
appliance first reduce the power and then
switches off
Sanitary warm water has been requested,
appliance commute to max. power to reach
the selected temp.
Appliance carries out an automatic procedure
to eliminate part of residuals remained into
the burner basket
Appliance started the extinction phase and
proceed with the disposal of the fuel still into
the basket.
Appliance noticed a too high fume
temperature, the power is at the moment
reduced.
Appliance noticed an anomaly, extinction
cycle starts and the display signals the type
of problem.
61/120
GB- - - - FR
FR mod. Serie 698TP....
GB
GB
FR
FR
Explanations
Publicité
