Usage Location - Canon CP-100 Guide D'utilisation

Power
Do not exceed the cable and power outlet ratings when operating this product. Do not
operate this product outside of the specified voltage rating.
Connecting too many lines to the same outlet may result in fire. Check that the voltage
of the outlet is compatible with the devices before them in.
If the AC cable becomes damaged (if internal wiring is exposed, etc.), immediately
unplug the cable from the electrical outlet. Continued use poses risk of fire or electric
shock.
Do not plug in or unplug the AC cable while your hands are wet, as this may result in
electric shock. When unplugging the cable, hold it firmly at the plug area. Do not pull
directly on the cable, as this may damage or expose the cable's internal wiring,
resulting in risk of fire or electric shock.
Be sure that the AC cable is plugged all the way in. A loose connection may result in
heat buildup, fire, or electric shock.
Do not damage, modify, or rest heavy objects on the AC cable. Damage to the cable
may result in the exposure of live wires, fire, or electric shock.
Keep the AC cable free of dust. The presence of dust or metallic debris on the plug
poses risk of fire or electric shock. If the plug area is not clean, unplug the AC cable
and then wipe the plug area clean using a dry cloth. Check the plug periodically to
make sure it is clean.

Usage Location

Do not place the devices on an unstable or tilted table or desk, as there is risk that the
devices may fall and cause injury.
Devices
Do not block the air vents on the printer. Blocking the vents may cause the inside of the
printer to overheat, resulting in damage to internal components and risk of equipment
failure or fire. Use the devices in a well-ventilated area.
Do not rest heavy objects on the devices. Objects may fall off the devices and cause
injury. Weight placed on the devices may deform the casing, resulting in damage to
internal parts and posing risk of fire.
Unplug the devices when you are not using them. If the devices remain plugged in,
there is risk that accidental contact with the device's internal parts may cause electric
shock. Leaving the devices plugged in during prolonged periods of non-use poses risk
of fire.
CAUTIONS
9