Publicité
can then be cancelled from the controller by rotating the
selector knob and pressing it, to confirm the cancel (Never
operate the grill without the ash cup in place). Always make
sure the burner clean-out port is closed by pushing in the
knob on the right side of the grill before selecting any of the
cook settings. Never open the burner clean-out port when
the grill is hot.
Emptying the Hopper
This grill is equipped with a hopper drain to quickly remove
the pellets from the hopper. This can be used to remove
pellets if the grill is being stored for a long time or to remove
pellets to change to a different flavor pellet.
Warning: Never remove the auger guard from the hopper
while the pellet grill is on. Never operate the grill without the
auger guard in place.
Caution: The instructions below must be followed when
emptying the hopper.
1. Unplug the grill from the power source.
2. Hang a bucket or use a box to catch the pellets that will
come out of the tube on the rear of the hopper.
3. Lift the pull-out lock on the left side of the hopper and pull
the hopper clean-out knob.
4. Sweep the remaining pellets in the hopper towards the
drain hole.
5. Push in the hopper clean-out knob and lock in place using
the pull-out lock.
App quick start guide (Optional)
1. Download the Camp Chef APP from the Apple APP store or
Android Play Store.
2. Turn the Grill controller on using the main power switch.
3. Open the Camp Chef APP and follow the setup instructions
for connecting the grill to your home 2.4 GHz WiFi network.
Warning - Do NOT leave this appliance unattended while
in use. The user must remain in the immediate area of the
product and have a clear view of the product at all times
during operation.
Note - Some functions are only available from the controller.
If attempting to start the grill from the APP it will prompt
you to confirm starting the grill from the controller.
Temperature and Smoke settings can be adjusted from the
APP. Shutdown can also be performed from the APP.
For more information visit https:/www.campchef.com/app
Controller Explanation
Power Switch
Used to turn the main power onto the pellet grill. "0" is OFF,
"|" is ON. See Fig 18. When the controller is first powered
on, the Selector Knob must be pressed to enter the MENU.
Controller Functions
Rotate the dial to scroll through menus, adjust temperature,
or smoke settings. Press the dial to select.
SHUTDOWN
This setting must be used after each use. Select SHUTDOWN
from the main menu. The fan will remain on for up to 20
minutes. This setting will burn up any extra pellets in the
burner and cool down the grill. Do not turn the main power
switch off when the grill is hot.
FEED - Select FEED from the main menu. This setting is
used to feed pellets to the burner. It will be used the first
time you use the grill to fill the auger tube and any time
you may inadvertently run the hopper out of pellets. See
FIG. 16
instructions on filling the auger tube.
SET TEMP LOW SMOKE - Select SET TEMP from the main
menu. Rotate dial to LOW SMOKE and press to confirm. This
HOPPER CLEANOUT
setting is used for smoking foods at an average temperature
of 160F. This setting will produce large amounts of smoke.
SET TEMP HIGH SMOKE - - Select SET TEMP from the main
menu. Rotate dial to HIGH SMOKE and press to confirm. This
setting is used for smoking foods at an average temperature
of 220F. This setting will produce large amounts of smoke.
SET TEMP 160F TO 450F - Select SET TEMP from the main
menu. Rotate dial to the desired temperature and press to
confirm.
SET TEMP HIGH - Select SET TEMP from the main menu.
Rotate dial to HIGH and press to confirm. This setting can
be used to achieve temperatures up to 500F depending on
ambient temperatures.
https://manual-hub.com/
Fig. 18
Publicité
