Publicité
Install Shelf
(Optional-Do not install if installing sear box)
1. Install shelf as shown in Fig 6.
2. Tighten all hardware
Grease Bucket
1. Hang grease bucket from tube as shown in Fig 6.
Ash Cup
1. Install Ash Cup as shown in Fig 7. Never use grill without
Ash Cup in place.
FIG. 7
ASH CUP
Install Deflector and Drip Tray
1. Install the Heat Deflector and Drip Tray as shown in Fig 8
and Fig 9.
FIG. 8
M6 X 15 SCREW
FIG. 6
GREASE BUCKET
DRIP TRAY
HEAT DEFLECTOR
Warming Rack and Cooking Grate
1. Install the Warming Rack and Cooking Grate as shown in
Fig 10.
Clean-out Knob Assembly Installation
Hand tighten the burner clean-out knob as shown in Fig 11.
Clean-out Port Knob
1. Clean-out Port knob must be pushed in when grill is on.
Make sure pullout lock is pushed down and locks the
knob to prevent inadvertent opening of the clean-out port.
See Fig 12.
https://manual-hub.com/
DRIP TRAY
HEAT DEFLECTOR
FIG. 9
PG24-1 (1)
WARMING RACK
PG24-70 (2)
COOKING GRATE
FIG. 10
PG24-9 (1)
BURNER PULLOUT KNOB
FIG. 11
FIG. 12
CLEANOUT PORT CLOSED
Publicité
