Parkside HG12250A Instructions D'utilisation Et Consignes De Sécurité page 29

Press the ON / OFF switch
o
light will off and the spotlight
[ 6 ]
same time.
Press the ON / OFF switch
o
the product.
˜ Fixing the product
The product can be used in 2 ways without having
to hold it in your hand:
Hold the magnet
o
base
9 ] [
The product remains in this position. You can
tilt the product up to 180 ° on the magnetic
base
.
[ 9 ]
CAUTION! Please note the position of your
m
hands whilst turning the magnetic base
prevent pinching your fingers (see Fig. B).
Fold out the hook
o
from a suitable suspension point. The hook
can be turned through 360 ° .
Note: When hanging up the product, it must be
ensured that the selected location is suitable for
the weight of the product.
˜ Maintenance and cleaning
The product requires no maintenance. The LEDs
cannot be replaced.
Switch off the product and disconnect from the
USB power supply before cleaning.
Never immerse the product in water or other
liquids.
Never use caustic cleaners.
Regularly clean the product with a dry, lint-free
o
cloth. Use a slightly moist cloth to remove any
stubborn dirt.
˜ Disposal
The packaging is made of environmentally friendly
materials, which may be disposed of through your
local recycling facilities.
26 GB/IE
at the back or the magnetic
5 ] [
against a metallic magnetic surface.
4 ] [
again, the side
2 ] [
1 ] [
again to switch off
2 ] [
to suspend the product
will on at the
to
9 ] [
4 ] [