Parkside HG12250A Instructions D'utilisation Et Consignes De Sécurité page 27

gloves at all times if such an event occurs.
This product has a built-in rechargeable battery
which cannot be replaced by the user. The
removal or replacement of the rechargeable
battery may only be carried out by the
manufacturer or his customer service or by
a similarly qualified person in order to avoid
hazards. When disposing of the product, it
should be noted that this product contains a
rechargeable battery.
˜ Before use
Note: Remove all packaging materials from the
product.
˜ Charging the product
Note: The product cannot be charged at
temperatures below 0 °C and above 45 °C
according to the battery protection.
Note: Fully charge the product before first use.
Note: It is recommended to use the product within
3 months after purchase.
Note: You can recharge the product by using the
USB cable
[ 10 ]
voltage and current (see "Technical data").
Note: Use only SELV power supply of maximum
working output voltage 5 V
Insert the USB (type C) connector of the USB
o
cable
10 ] [
of the product.
Then insert the USB plug of the USB cable
o
into the USB port on USB power supply.
Note: For HG12250A: the USB input socket
(type C)
7 ] [
extend the lamp completely before charging.
Note: Pay attention to the distance between
the lamp and USB power supply because USB
cable
10 ] [
24 GB/IE
WEAR PROTECTIVE GLOVES! Leaked
or damaged batteries / rechargeable
batteries can cause burns on contact
with the skin. Wear suitable protective
provided with the specified input
into the USB input socket (type C)
is hidden in the lamp (Fig. B). Please
length is approx. 1 m .
(Uout) 1A.
7 ] [
10 ] [