Dometic MO0911 Livret D'instructions page 9

INJECTOR
THE OpERATIONS MUST bE CARRIED OUT bY AUTHORIZED pERSONNEL.
DOMETIC DECLINES ANY RESpONSIbILITY RELATED TO SAID INTERVENTION.
CLEANING AND/OR REPLACEMENT OF BURNER INJECTORS (FIG. 1 - PAG. 21)
When removing or installing an injector, the holder must be held with a suitable tool.
BURNERS
AUXILIARY
Ø 47 mm - 1 27/32"
SEMIRAPID
Ø 62 mm - 2 7/16"
RAPID
Ø 77 mm - 3"
TEST PRESSURE POINT
THE OpERATIONS MUST bE CARRIED OUT bY AUTHORIZED pERSONNEL.
DOMETIC DECLINES ANY RESpONSIbILITY RELATED TO SAID INTERVENTION.
The test pressure point is located on the pressure regulator.
CLEANING
TURN OFF THE AppLIANCE AND ALLOW TO COOL bEFORE CLEANING.
COLD WATER OR A DAMp CLOTH MAY DAMAGE HOT SURFACES.
DO NOT USE AbRASIVE, CORROSIVE, CHLORIDE-bASED pRODUCTS OR STEEL OR
OTHER SCOURING pADS. DO NOT LEAVE ACIDIC SUbSTANCES E.G. VINEGAR, SALT,
LEMON JUICE ETC. ON THE AppLIANCE SURFACES. STAINLESS STEEL SURFACES
AND ENAMELED pARTS SHOULD ONLY bE WASHED WITH SOApY WATER OR
NEUTRAL DETERGENT, RINSED AND DRIED. ONLY USE CLEAN SpONGES OR
CLOTHS.
WARRANTY
In case of warranty claim or any repair or replacement which becomes necessary, the vehicle or part dealer who sold
the product should be contacted. Give model and serial number on all repair part orders and correspondence.
HOBBED
NUMBER
0,57
0,72
0,80
57
72
80