Publicité
All manuals and user guides at all-guides.com
EN
Calibration (reset) of the Chronograph
This procedure should only be performed if the second hand of the chronograph
does not return to the zero position after the chronograph has been reset or
after battery change.
1. Pull out the crown to position 2.
2. Press button A or B to set the second hand to the zero position. A short
push will give you a step by step advance whereas the hand can be advanced
rapidly by continuously pushing one of the buttons.
3. Please make sure that the second hand and the minute hand of the chrono-
graph are in the zero position. Now push back the crown into position 1. The
chronograph has now been successfully calibrated.
16
Publicité
