Publicité
All manuals and user guides at all-guides.com
Setting the time and the 24 h display
1. Pull out the crown into the 2nd position
2. Set the time by turning the crown. The 24 h hand will also turn.
3. Push back the crown into the 1st position after the desired time and proper
24 h display have been adjusted.
Chronograph – simple use of the stop watch
1. Push button A to start the Chrono (stop watch)
2. Repush button A to stop the function
3. Push button B to reset to zero
Taking split time
1. Push button A to start the Chrono (stop watch)
2. Push button B to measure the split time
3. Repush button B for split release. Now the second hand advances rapidly to
catch up on the elapsed time since the split time.
4. Repush button A to stop the Chrono
5. Push button B to reset to zero.
EN
15
Publicité
