Publicité
charged. Batteries must always be protected
against short circuits by covering the poles
with adhesive tape.
All end users are responsible for deleting any
personal data stored on waste devices prior
to their disposal.
Disposal of the packaging
The packaging consists of cardboard
and correspondingly marked plastics
that can be recycled.
– Make these materials available
for recycling.
Technical data
Item number
Chain saw
Idling speed
Length of the saw rail
Cutting speed
Oil tank capacity
Noise pressure level
(L
)*
PA
Sound power level (L
Vibration**
• Front handle
• Rear handle
Weight
Saw rail
Saw chain
Max. operating duration
with a full battery
Battery charger
Rated voltage
Rated power
Charge voltage
Charge current
Protection class
Battery pack
Battery pack type
Rated voltage
Capacity
Charging time
*)
The specified values are emission values and do not necessarily
represent safe workplace values. Although there is a correlation
between emission and immission levels, this cannot be used to
infer whether additional safety measures are necessary or not.
Factors which affect the current immission levels at the work-
place, include the type of room, other sources of noise, e. g. the
number of machines operating and other processes taking place
All manuals and user guides at all-guides.com
196076
-1
8000 min
300 mm
15 m/s
180 ml
86,6 dB(A)
(K = 3 dB(A))
)* 95,2 dB(A)
WA
(K = 3 dB(A))
< 2,5 m/s²
< 2,5 m/s²
(K = 1,5 m/s²)
4,2 kg
Oregon
144MLEAO41
Oregon 90PX-
052X
30 min
230 V~, 50 Hz
140 W
20,9 V
2,4 A
II
Li-Ion
20 V
4000 mAh
120 min
in the vicinity. Permitted workplace values can differ from coun-
try to country. This information is designed to help the user to
better assess the dangers and risks. Determination of noise
emission values in accordance with EN 60745-1.
**) The specified vibration emission value was measured in accord-
ance with a normed test procedure and can be used in order to
compare one tool with another. The specified vibration emission
value can also be used for an introductory evaluation of the
exposure. The vibration emission value may fluctuate from the
specified value during actual use of the power tool. These fluc-
tuations will depend on the way in which the power tool is used.
Try to keep vibrations to a minimum. One method of reducing
the vibration load is, for example, limiting the length of time you
work with the tool. All parts of the operating cycle must be taken
into account for this purpose (for example, also including times
in which the power tool is switched off and times in which it is
switched on, but is running without load). Determination of vibra-
tion emission values in accordance with EN 60745-1 &
EN 60745-2-13.
Appropriate chain oil
NOTICE! Risk of damage to the
device! Under no circumstances
should you use old oil to lubricate the
saw chain! This can cause damage to
the oil pump, saw rail and chain!
Use only special saw chain oils with good
adhesion properties. Since the saw chain oil
can penetrate the environment during opera-
tion, biologically-degradable special vegeta-
ble-based saw chain oils should be used.
Accessories
You can find more information about suita-
ble batteries and spare parts of the 1 Power
Systems here: see QR Code
GB
63
Publicité
