Publicité
All manuals and user guides at all-guides.com
• This product is not intended to be used by
persons (including children) or who are
limited in their physical, sensory or mental
capacities or who lack experience and/or
knowledge of the product.
• Children should be supervised to ensure
that they do not use the product as a toy.
• Children and adolescents are not allowed
to operate the chain saw. The same
applies to persons who are not or not well
enough acquainted with the chain saw.
• The operating instructions should always
be within easy reach.
• Persons suffering from fatigue or who are
not physically fit must not operate the
chain saw.
• Keep the handles dry and free from
grease. Slippery handles can cause acci-
dents.
• Keep a firm hold of the electrical tool
with both hands while working and
make sure you are standing firmly.
The electrical tool is more safely guided
using two hands.
• Do not leave tools, objects or cable lay-
ing around in the vicinity of the
device. If you stumble, you may injure
yourself on the power tool.
• Make sure that all safety facilities and
handles are mounted when using the
product.
• Never attempt to operate an incompletely
mounted product or a product with imper-
missible modifications.
• Wait until the electrical tool has come to a
standstill before putting it down.
• Do not use any accessory that has not
been provided and recommended by
the manufacturer specially for this
electrical tool. Just because the acces-
sories can be fixed on your electrical tool,
no secured use is ensured.
• Remember that moving parts may also be
located behind ventilation and venting
slots.
• The fuse must be a residual current cir-
cuit-breaker with a measured residual
current of no more than 30 mA.
• Lay out the cable such that it cannot
become caught in branches or similar dur-
ing sawing.
• Never work without the claw stop. Never
remove the claw stop.
• Beginners should at least first practice
cutting round wood logs positioned on a
saw block or on a frame.
• If the power supply cable is damaged, it
must be replaced with a specially
equipped cable, which is available from
the customer service organisation.
• Changing of the plug or the power supply
cable must always be carried out by the
manufacturer of the electric tool or by a
manufacturer's service.
• Symbols appearing on your product may
not be removed or covered. Information
on the product that are no longer legible
must be replaced immediately.
Be careful when handling the de-
vice! Observe all safety instructions
in the instructions for use!
Read and observe the operating in-
structions before commissioning.
Do not expose the machine to
moisture.
Area with a danger of kickback
Always hold the device firmly in
both hands.
Always maintain a sufficiently safe
distance.
Only re-charge the battery pack in-
doors.
Do not dispose of a battery pack in
water!
Do not burn the battery pack!
Do not expose the battery pack to
sunlight or increased tempera-
MAX. 40°C
tures!
Length of the saw rail
XXX mm
GB
55
Publicité
