Roborock Auto-Empty Dock Pure Mode D'emploi page 12

Getting Started
Assembly
1. Take the screwdriver from its storage bin at the bottom of the base.
2. Place dock upside down on a soft, flat surface (carpet/towel/
cloth) and attach the base by using the six screws provided.
Note: Hold the dustbin cover securely when upside down to prevent damage
from falling.
All manuals and user guides at all-guidesbox.com
3. Connect the power cable to the dock, and keep excess cable
inside the storage slot.
4. Place the dock on a hard and flat floor (wood/tile/concrete etc.).
Keep at least 0.5 m (1.6 ft) of clearance on either side, 1.5 m (4.9 ft)
in front, and 1 m (3.3 ft) above. Check the location has good WiFi
then plug it in.
≥ 0.5 m (1.6 ft)
11
≥ 1 m (3.3 ft)
≥ 0.5 m (1.6 ft)
≥ 1.5 m (4.9 ft)