Publicité
NOTICE!
Risk of damage to property!
Loose cabling can get caught around your ro-
bot vacuum and mop during vacuum clean-
ing and be pulled along by the appliance.
This can result in appliances being pulled off
a table and consequently damaged.
Lay cables out of the reach of the appli-
ance.
Remove all fragile items (e.g. glass, lamps,
vases) and objects that could become
trapped in the brushes or sucked up (e.g.
cords, clothing, newspapers, curtains)
from the working area before operating
the appliance.
Remove all rugs from the room before vacu-
uming.
This robot vacuum cleaner is intended for use
on hard floors. Ensure that the dust container
is clean and that the filter has been correctly
inserted.
Press the operating switch on the under-
side of the robot vacuum cleaner:
Position I:
ON
Position O:
AUS
Press the
button on the appliance to
switch on the robot vacuum cleaner.
Press the
button on the appliance or
on the remote control to start the auto-
matic cleaning process.
Press the
button again or press the
button on the remote control to inter-
rupt the automatic cleaning programme.
Press the
button again to continue
cleaning.
Press the
button on the appliance for
approx. seconds to switch off the robot
vacuum cleaner. The battery status indicator
light and operating status indicator light on
the robot vacuum cleaner turn off.
8. Mopping mode
To use the robot vacuum cleaner for damp
mopping, the water tank with wiping cloth
must be used.
Fig. – Preparing mopping
Do not fill the water tank with distilled or
demineralised water.
Do not add strong or heavily foaming deter-
gents, fragrances or similar substances, or
solid cleaning additives to the water tank.
Lift the tab of the filling opening and fill
the water tank with clean tap water.
Close the filling opening with the tab.
Wet and wring the wiping cloth before
use.
Slide the wiping cloth strip into the
groove on the water tank.
DE
FR
NL
ES
IT
EN
95
Publicité
