Publicité
3. Continue to operate the product without the
power trigger pushed.
4. Push the cruise control button again to stop
the cruise control function.
To temporarily increase the airflow
1. Start the product. Refer to
on page 13 .
Introduction
WARNING:
maintenance work you must read and
understand the safety chapter.
Maintenance
Clean the outside of the machine with a clean and dry cloth. Never use
water.
Keep handles dry, clean and free from oil and grease.
Make sure that the power button works correctly and is not damaged.
Make sure the power trigger is functioning properly with regard to
safety.
Check that nuts and screws are tight.
Check that the battery is intact.
Check the battery's charge.
Check that the release buttons on the battery works and locks the
battery into the machine.
Check that the battery charger is intact and functional.
14
To start the product
Maintenance
Before you do any
2. Push the power boost button to get the
maximum airflow. The LED comes on.
3. Release the power boost button to use the
product with the initial air flow.
Maintenance schedule
WARNING:
before you do maintenance.
The following is a list of the maintenance steps
that you must do on the product.
Remove the battery
Daily
Weekly
Monthly
X
X
X
X
X
X
X
X
X
2125 - 005 - 14.01.2025
Publicité
