Publicité
1. Install the battery charger on the wall with
the 2 screws (A). Use wall plugs (B) if it is
necessary.
A
A
Introduction
WARNING:
the safety chapter before you use the
product.
To do a function check before you use
the product
1. Do a check of the air inlet for dirt and cracks.
Use a brush and clean off grass and leaves
from the product.
2. Make sure that the product works correctly.
3. Do a check of all nuts and screws and make
sure that they are tight.
To connect the battery charger
WARNING:
charger in ambient temperatures
between 41°F (5°C) and 104°F (40°C).
1. Connect the battery charger to the voltage
and frequency that is specified on the rating
plate.
2. Put the plug in a grounded power outlet. The
LED on the battery charger flashes red 1 time
and green 1 time.
12
B
C
D
Operation
Read and understand
Only use the battery
2. Install the 2 screw hole plugs (C).
3. Connect the power cord (D) to the battery
charger and a mains socket.
To charge the battery
CAUTION:
battery, the battery charger and the
terminals on the battery are clean and
dry. Do not put the battery in the
battery charger if it is dirty or wet.
1. Connect the battery charger to a power outlet.
The charging LED flashes red 1 time and
green 1 time.
CAUTION:
battery charger to a power outlet
with the voltage and frequency
specified on the rating plate.
2. Connect the battery to the battery charger.
The charging LED comes on.
3. Remove the battery from the battery charger
when it is fully charged. Push the battery
indicator button for battery status. When all
the LED indicators come on, the battery is
fully charged.
4. Pull the power plug to disconnect the battery
charger from the power outlet. Do not pull the
power cord.
Make sure that the
Only connect the
2125 - 005 - 14.01.2025
Publicité
