Technical Data; Product Cleaning; Disposal Information - Komet MicroKom BluFlex Mode D'emploi

technical data

Linearity range: -0.2 to +4.4 mm (-0.0079 to 0.1732") in the x, do
not operate the precision boring head outside of the adjustment range
Linearity error m w5 µm
Max. coolant pressure: 50 bar
Head diameter: 65 mm
Height: 71 mm
Weight of head without tool: 1.58 kg
Max. speed: 20,000 rpm in central position (see page 29)
Working temperature: + 10 °C to + 40 °C (+50° F to + 104° F)
Storage temperature: - 20 °C to + 60 °C (-4° F to + 140° F)
Adaptor: ABS 50
Protection class: IP67
Batteries 2x Typ AAA 1,5V
Display resolution: 0.002 mm (0.0001") in diameter
Protection class: IP54
Energy-saving function: Automatic switch-off after 30 seconds
Batteries 4x Typ AAA 1,5V
Integrated Allen key (WAF 4)
Protection class: IP54

Product cleaning

- Do not use any solvent-based cleaning agent to clean components.
- After use, coat the precision adjustment head with a thin film of oil.
- After use, remove foreign material from the adjustment key connection point.

Disposal information

The product is subject to legally binding disposal regulations at the end of its
useful life. The MicroKom BluFlex ® precision drilling system must be disposed
of in accordance with national and local rules and regulations as part of the nor-
mal recycling process. At the time of disposal, the following must be observed:
Components submitted for recovery are separated into
• Electronics scrap • Iron scrap • Aluminum • Plastic
rules and regulations governing battery disposal must be ob-
served. Do not dispose of batteries in household waste.
local battery disposal regulations may require you to take used
or defective batteries to local battery collection points or to
return them to your retailer.
englIsh
21