Publicité
C
Useful information
Problems
The washing time is
longer than indicated in
the manual. (*)
The programme
duration is not counted.
(In models with
displays) (*)
The programme
duration is not counted.
(*)
Possible causes / Solutions
• The water pressure is low.
• The voltage could be low.
• The water inlet temperature may
be low.
• The number of rinses and/or the
amount of rinse water may have
increased.
• Too much foam may have formed
and the automatic foam absorption
system may have been activated
due to excessive use of detergent.
• The timer may stop whilst the
water is being drained.
• The timer may stop during the
heating phase.
• The timer may stop during the
spin phase.
The machine may contain an
unbalanced load.
42
• The machine is waiting until it
senses an adequate amount of
water to avoid poor washing quality
due to a reduced quantity of water.
This is why the washing time is
longer.
• The washing time is extended to
avoid poor washing results when
the supply voltage is low.
• The time needed to heat the water
is longer during the cold seasons.
The washing time may also be
extended to avoid poor washing
results.
• The machine increases the
amount of rinse water when a
thorough rinse is required and adds
an extra rinse stage if necessary.
• Use the recommended quantity of
detergent.
• The timer indicator does not
record any counting until the
machine has drained a sufficient
amount of water. The machine will
wait until there is sufficient water to
prevent poor washing results due to
a lack of water. The timer indicator
will resume the countdown once
this process is complete.
• The timer indicator does not
record any counting until the
machine has reached the selected
temperature.
• An automatic unbalanced load
detection system may activate due
to uneven distribution of laundry
inside the drum.
An automatic unbalanced load
detection system may activate due
to uneven distribution of laundry
inside the drum.
EN
Publicité
