Publicité
B
NOTE : In the event if a power failure, you can open the
loading door manually using the emergency handle located
underneath the pump filter lid.
WARNING : Before opening the loading door, make sure
that there is no water remaining inside the machine to
prevent an overflow.
• Switch off and unplug the appliance.
• Open the lid on the pump filter.
• Pull out the emergency handle on the loading door behind the filter lid using a suitable tool.
• Open the loading door by pulling the emergency handle on the loading door downwards.
• Try to pull the handle downwards again if the loading door has not opened.
• Return the emergency handling on the loading door to its initial position after opening the
loading door.
Changing selections after launching the programme
Switching the machine to pause mode
Using the appliance
31
EN
Publicité
