Publicité
syncing two bases (optional)
A Sync Cord is included with the base . Not available on Queen, Full or Full-Long size bases .
The Sync Cord connects the two control boxes to a single remote for the synchronization of two bases .
This process is most commonly used for syncing two connected TXL bases .
STEP 1
Unplug bases from power source .
STEP 2
Connect the Sync Cord to the Multifunction port of each Control
Box .
STEP 3
Plug bases back into the power source .
STEP 4
Check to ensure all cords are securely attached . Both remotes
will now operate both bases simultaneously .
The system is now linked . Pressed buttons on either remote
will control the two bases simultaneously .
Control Box 1
PERFORMANCE NOTES
If bases become mismatched, returning the bases to the flat
positions will re-sync the mechanical positions .
Sync Cord
Control Box 2
17
Publicité
