Publicité
pair remote
Remote Pairing
The original remote that comes in the box is already paired to the adjustable base . No further action is required . In the event that
the remote is not paired with the base, follow the steps below .
STEP 1
Unplug the Power Cord from your power outlet . Wait 1
minute, then plug it back in to your power outlet . Perform
Step 2 within 10 seconds, while the control box light is
flashing .
Power Supply
STEP 2
Press and hold the PAIR button on the
back of the remote . The PAIR button
will illuminate and start to flash . When
the PAIR button stops flashing, the
LED light on the control box will stop
flashing . Release the PAIR button .
Power Cord
STEP 3
The remote is now paired to the adjustable base . Test all
remote functions . If the remote buttons do not impact the
adjustable base movements, please repeat the process again .
*Ensure that the remote is not in Child Lock Mode .
See pg. 13 for Child Lock Deactivation instructions.
15
Publicité
