Publicité
8) Use and handling of the charger
-
Connect the charger only if the voltage of the socket
matches the information on the rating plate.
-
Connect the charger only to an easily accessible socket
so that you can quickly disconnect it from the mains in
the event of a malfunction.
-
Always allow sufficient ventilation when charging the
battery; gases may be released.
-
Do not charge non-rechargeable batteries.
-
Keep the charger away from humidity.
-
Never use the charger in environments where explosive
or flammable materials are present. There is a risk of
fire and explosion.
-
Do not place objects on top of the charger and do not
cover it.
-
Keep the charger away from heat sources.
-
Regularly check the charger for damage.
-
Repair damaged chargers properly before reusing them.
-
The charger must not be disassembled. Repairs must
only be carried out by an authorised technician.
-
Do not use the charger if it has been subjected to shocks
or falls.
-
Always unplug the charger from the power supply after
use.
-
Unplug the charger from the power supply before
cleaning, servicing, storing and transporting, and allow
it to cool completely.
9) General precautions
-
Hold the electric tool by the insulated gripping surfaces
when performing an operation in which the tool may
come into contact with exposed wiring. The tool must
22
PERFECTSURFACE 2120 ROTATE
Publicité
