Publicité
ENGLISH
2.
When sanding, do not exert too much pressure on the handle. Also, try to work
uniformly. By following these recommendations, you will avoid damage to the tool
and premature wear of the sanding sheet.
3.
Polish the corners and edges with the top or side of the sanding sheet.
4.
When you have finished sanding, remove the tool from the workpiece and switch it
off.
5.
Clean the sanding pad before fitting the sanding sheet.
6.
Empty the dust collection tank and vacuum cleaner regularly to ensure optimum
suction.
Selecting the right sanding sheet
Grammage
Use
P 60
P 80
Sanding rough wood surfaces.
P 120
P 180
Sanding flat surfaces.
P 240
Sanding primed and painted surfaces.
Practical advice
-
Always hold the tool with both hands.
-
Do not exert excessive pressure on the tool. Check the condition of the sanding sheet
periodically. Replace it when necessary.
-
Always sand in the direction of the wood grain.
-
Always switch the sander on before contacting the work surface and do not switch it off
until it has been lifted off the work surface.
-
Whenever possible, clamp the workpiece to a workbench or other similar firm surface.
-
When sanding new coats of paint before applying another coat, use extra fine grit. On
other surfaces, start with a medium grit. In both cases, gradually change to a fine grit for
a smooth finish.
5. CLEANING AND MAINTENANCE
WARNINGS:
-
Unplug the tool from the mains before making any adjustments or performing any
maintenance or repair operations, otherwise an electric shock may be produced.
-
Repair and maintenance operations not indicated in this manual must be carried out by
qualified personnel. Only use original parts.
-
The following cleaning and maintenance tasks must be carried out regularly.
156
PERFECTSURFACE 2120 ROTATE
Publicité
